24V 14.4W 1750lm 2835 led strip light #SP2835L120.210

Features

• 24V DC constant voltage strips,dimmable
• >120 lm/W
• 14.4 Watts/meter
• Colour rendering index: 80
• 6 steps MacAdam ellipse binning
• >50,000 hours at L70
• Adhesive back on surface,or with Aluminium profile
• Solderless connector or terminal wires connection
• Minimum 100mm cut, maximum continuous run 5 meters
• Ship in 5m, 10m, 25m or 50m reels
• IP20 or IP65 Silicon sleeve or IP67 Silicon solid sleeve
• Standards:IEC 62031 IEC 62471
• Certificate:CE,RoHS,FCC

Technology Benefits

• Excellent in colour consistency and efficiency
  
• Long lifespan and extreme brightness
  
• Quick installation,paste directly,no costly modification
  
• Cost savings,Low-maintenance and quicker ROI
  
• Comfort, safety, no glass, flexible, easy to bend

Application

• Home decoration includes ceiling, dark room, wine cabinet, shoe cabinet, wardrobe.
• Commercial decoration includes shopping mall ceiling, hotel bar, hotel lobby, guild hall.
• Exhibition booth, stair steps, handrails and other auxiliary lighting and decoration. 



 

Technical Features

• One meter (entire module 120 LEDs) comes with one LED-band
• Light emission vertical to the mounting surface
• Dimensions (L x W x H): 1,000 mm x 10 mm x 1.2 mm
• Length of smallest unit with 6 LED: 50 mm
• Additional cutting possibilities by using the termination
• Easy mounting by adhesive tape on isolated backside
• Easy connection with optional connect system
• Dimmable by pulse width modulation (PWM)
• Max. 10 meters in series connection
• Parallel connection is allowed

 

 

Drawings

Unit:mm

 



Technical Operating Data

Product	Color	Number of LEDs	Volt.   [V DC]	Power [W]	Current [A]	Radiance Angle [°]	Color Temp.[K]	Lum.Flux [lm]
SP2835L120.21060	white	120	24	14.4	0.6	120	6000	1750
SP2835L120.21040	white	120	24	14.4	0.6	120	4000	1650
SP2835L120.21030	white	120	24	14.4	0.6	120	3000	1550
SP2835L120.21027	white	120	24	14.4	0.6	120	2700	1450
※ All Data are related to the entire module. ※ Due to the special conditions of the manufacturing processes of LED the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data.

 

 

 

Specified Accessories